EVT290A-CPNSS

EVT290A-CPNSS

Original price was: $116.95.Current price is: $78.00.

EVT290A-CPNSS | Permanent Installation Bolt & Nut Set for 290mm Truss (10 Pack)

Specs & Compatibility
Function: Vibration-resistant hardware for permanent truss installations
Pack Quantity: 10 Sets (Bolts + Nylon Insert Lock Nuts)
Dimensions: M8 Threading x 18mm Length
Installation Requirement: Tighten to 10~12 N/m Torque

Construction & Materials
Material Type: High Grade 304 Stainless Steel (Maximum Corrosion Resistance)
Locking Mechanism: Nylon Insert Lock Nut (Prevents loosening from vibration)

Finish & Features
Included: 10x M8 Bolts and 10x Nylon Insert Nuts
Weight: 1.08 lb (0.49 kg)

In stock

SKU: EVT290A-CPNSS Categories: , ,

EVT290S Truss Systems Knowledge Center

EVT290A-CPNSS Stainless Steel Coupler-Pin and Locknut Set.
10-Pack Threaded Hardware for Long-Term 290 mm Truss Installations.

The EVT290A-CPNSS is a threaded coupler-pin and nylon-insert locknut set for compatible 290 mm conical truss connections. Each pack includes 10 304 stainless steel M8 threaded coupler-pins and 10 matching locknuts. The locknut replaces the standard r-clip retention method for installations where the completed truss structure is intended to remain assembled long-term. Use the set only with verified compatible truss receivers, couplers, pin interfaces, and an approved finished structure.

Product Facts

Model / SKUEVT290A-CPNSS
Product TypeThreaded Coupler-Pin and Locknut Set, 10-Pack
Material304 Stainless Steel
Thread SpecificationM8 x 18 mm
Locking MechanismNylon-Insert Locknut
Pack Weight1.08 lb / 0.49 kg
10Coupler-Pins Included
10Locknuts Included
10–12 NmRecommended Torque
M8Thread Specification
304Stainless Steel Grade

Product Overview

A Threaded Locking Alternative to Standard R-Clip Retention.

The EVT290A-CPNSS uses a threaded coupler-pin and nylon-insert locknut instead of a standard coupler-pin and r-clip. The M8 threaded end receives its matching locknut after the pin is installed through the verified connection interface. The nylon insert is intended to help resist loosening in long-term installations. The completed truss structure—not the threaded hardware alone—determines all support, loading, inspection, and engineering requirements.

Threaded Locking Method
The threaded M8 end and matching nylon-insert locknut replace the standard r-clip retention method.
Long-Term Installation Use
Use in compatible installations where the completed truss structure is intended to remain assembled for an extended period.
304 Stainless Steel
The coupler-pins are manufactured from 304 stainless steel for corrosion resistance.
290 mm System Fit
For compatible EVT290I, EVT290T, EVT290S, F34-format, and verified 290 mm conical interfaces.

What the Hardware Supports

Threaded Connections for Long-Term Truss Installations.

The EVT290A-CPNSS is intended for compatible permanent or semi-permanent truss installations where threaded locknut retention is selected instead of standard quick-release r-clip retention. Review the verified connection interface, fastener condition, torque requirements, environment, installed loads, and complete support plan for the actual finished structure.

Nightclubs and Venues
Use threaded retention in planned long-term venue truss structures where sound and vibration conditions are considered in the installation plan.
Houses of Worship
Use in verified long-term truss installations where threaded hardware is selected for the approved structure.
Retail Installations
Use in planned retail and display structures where the completed truss system remains installed long-term.
Humid Environments
304 stainless steel hardware can be selected where corrosion resistance is required by the installation environment.

Included Components

10 Sets of Threaded Locking Hardware in Every Pack.

The EVT290A-CPNSS includes 10 M8 threaded coupler-pins and 10 nylon-insert locknuts: enough hardware for 10 individual coupler-pin positions. Standard r-clips are not part of this threaded retention system. Confirm current package contents, thread condition, connection requirements, and torque requirements before installation.

10 Threaded Coupler-Pins
Ten 304 stainless steel coupler-pins with M8 x 18 mm threaded ends.
10 Nylon-Insert Locknuts
Ten matching locknuts provide threaded retention for the installed coupler-pins.
304 Stainless Steel
Stainless steel construction provides corrosion resistance for planned long-term installations.
10–12 Nm Torque
Tighten each installed locknut to the specified recommended 10–12 Nm torque range.
Threaded hardware replaces the r-clip retention method.

Do not combine a threaded locknut installation with assumptions from a standard r-clip connection. Confirm the specified pin, locknut, coupler, receiver, torque, and complete approved structure before use.

Technical Reference

EVT290A-CPNSS Specifications.

The following values identify the hardware material, thread specification, recommended torque, pack contents, weight, and listed system fit. Confirm current manufacturer drawings, instructions, package contents, component condition, and project requirements before ordering, assembling, lifting, or loading a complete truss structure.

Identification

Product Information

Model / SKUEVT290A-CPNSS
BrandEvolve Truss
Product TypeThreaded Coupler-Pin and Locknut Set, 10-Pack
Pack Weight1.08 lb / 0.49 kg

Construction

Materials and Finish

Coupler-Pin Material304 Stainless Steel
Locking MechanismNylon-Insert Locknut
FinishMill Finish

Hardware

Thread and Torque

Thread SpecificationM8 x 18 mm
Recommended Torque10–12 Nm
Pack Contents10 Coupler-Pins, 10 Locknuts

System Fit

Compatibility

Primary SystemsEVT290I, EVT290T, EVT290S
Listed CompatibilityF34-Format and Verified 290 mm Interfaces

System Compatibility

Use CPNSS Hardware in Compatible 290 mm Conical Truss Systems.

The EVT290A-CPNSS is intended for compatible EVT290I I-Beam, EVT290T triangular, EVT290S square, F34-format, and verified 290 mm conical truss systems when pin diameter, taper, coupler details, receiver dimensions, threaded locknut fit, component condition, and applicable documentation are verified. Physical fit or nominal 290 mm size alone does not establish structural equivalence for the completed truss structure.

EVT290I Compatibility
Use with compatible EVT290I I-Beam aluminum truss conical connection interfaces.
EVT290T Compatibility
Use with compatible EVT290T triangular aluminum truss conical connection interfaces.
EVT290S Compatibility
Use with compatible EVT290S nominal 290 mm square truss conical connections.
F34 Compatibility
Use with F34-format components only when the complete pin, locknut, receiver, and coupler interface matches.
Verify fit before mixing brands.

Confirm pin diameter, taper, coupler interface, receiver dimensions, threaded locknut fit, and hole alignment before using hardware with another truss system. Do not force a pin into a connection that does not align naturally.

Assembly Overview

Align, Pin, Thread, and Torque Every Connection Before Use.

Install threaded coupler-pins only with compatible components, current manufacturer instructions, and the approved truss plan. If the pin hole does not align naturally, stop and inspect the connector, coupler, receivers, component orientation, and complete connection. Do not force a pin into a misaligned interface.

01 — Inspect Hardware
Inspect each coupler-pin and locknut for damaged threads, deformation, severe wear, or conditions that prevent correct installation.
02 — Align the Interface
Confirm the compatible conical coupler, truss receivers, and pin hole align correctly before installing the pin.
03 — Insert the Coupler-Pin
Insert the compatible threaded coupler-pin fully through the verified connection point.
04 — Install the Locknut
Thread the matching nylon-insert locknut onto the installed coupler-pin.
05 — Torque to Specification
Tighten the locknut to the specified recommended 10–12 Nm torque range.
06 — Approve for Handling
Confirm every required coupler-pin and locknut is installed, torqued, and secure before moving, lifting, or loading the truss structure.

Safety and Engineering

Every Threaded Coupler-Pin Requires Correct Torque and Inspection.

The CPNSS set does not independently establish a load or span rating. Threaded coupler-pins and nylon-insert locknuts form part of a complete conical truss connection. Damaged, worn, incompatible, improperly torqued, or incorrectly installed hardware can compromise the completed truss structure. Evaluate all connection, support, inspection, load, and engineering requirements for the actual approved configuration.

Inspect all threaded coupler-pins, locknuts, couplers, receivers, chords, braces, welds, and related hardware before use.
Tighten each locknut to the specified recommended 10–12 Nm torque range.
Do not use pins or locknuts showing damaged or stripped threads, cracks, deformation, severe wear, or any condition that prevents correct installation.
Replace locknuts after removal where required by current manufacturer instructions or the approved installation procedure.
Do not substitute standard bolts, r-clips, or non-matching hardware for the specified threaded coupler-pins and nylon-insert locknuts.
Do not rely on nominal 290 mm size or apparent physical fit as the sole basis for mixing truss manufacturers or systems.
Use qualified rigging or engineering review for overhead, public-facing, outdoor, load-bearing, or regulated truss structures.

Product Questions

EVT290A-CPNSS Questions.

How is this set different from standard coupler-pin and r-clip hardware?

The CPNSS set uses a threaded M8 coupler-pin and matching nylon-insert locknut instead of the standard r-clip retention method.

What torque should the locknut be tightened to?

Tighten each locknut to the specified recommended 10–12 Nm torque range.

Can locknuts be reused after disassembly?

Follow current manufacturer instructions and the approved installation procedure. Replace locknuts after removal where replacement is specified for the installation.

Which truss systems can the set be used with?

The set is intended for compatible EVT290I, EVT290T, EVT290S, F34-format, and verified 290 mm conical truss interfaces. Confirm the complete connection interface before use.

Planning a Long-Term Truss Installation?

Contact us for component selection, threaded connection hardware, compatible EVT290I / EVT290T / EVT290S / F34 components, connection verification, engineering coordination, and freight assistance.

Contact UsRequest a Quote

Structural Solutions, Unmatched Innovation

Weight 1.08 lbs
Dimensions 2 × 2 × 2 in