EVT290A-CS10 Black

EVT290A-CS10 Black

Original price was: $26.00.Current price is: $25.00.

EVT290A-CS10 Black | 10mm Coupler Spacer for 290mm Truss (Matte Black)

Dimensions & Specs
Spacer Length: 0.39 in (10 mm)
Outer Diameter: 1.96 in (50 mm) (Matches standard truss tubing)
Function: Expands truss length for custom measurements and adjustments

Construction
Material Type: Aluminum Alloy EN AW-6061 T6
Type: Double-Ended Male Conical Coupler
Compatibility: Fits standard 290mm Truss Conical Connection points

Finish & Features
Surface: Matte Black Finish
Included: 10mm Spacer Coupler Only
Note: Coupler Pins and Cotter Pins are NOT included
Weight: 0.40 lb (0.18 kg)

In stock

SKU: EVT290A-CS10-Black Categories: , , ,

EVT290S Truss Systems Knowledge Center

EVT290A-CS10 Black 10 mm Male Truss Coupler Spacer.
Adds 10 mm to a Compatible 290 mm Conical Truss Connection.

The EVT290A-CS10 Black is a matte black, double-ended male conical aluminum spacer that adds a fixed 10 mm / 0.39 in at one compatible 290 mm truss connection. It has the same dimensional function as the brushed aluminum EVT290A-CS10; the matte black powder coat is a finish selection for truss that remains exposed to view. It is not a truss section, independent support point, or direct load-attachment location.

Product Facts

Model / SKUEVT290A-CS10-Black
Product TypeDouble-Ended Male Conical Coupler Spacer
Added Length10 mm / 0.39 in
Outer Diameter50 mm / 1.96 in
MaterialAluminum Alloy EN AW-6061 T6
Component Weight0.40 lb / 0.18 kg
10 mmLength Added
50 mmOuter Diameter
Matte BlackPowder-Coat Finish
0.40 lbComponent Weight
Not IncludedPins and R-Clips

What It Is

A 10 mm Spacer with a Matte Black Finish.

This is the matte black version of the 10 mm CS10 spacer. Its dimensional function remains a fixed 10 mm addition at one compatible joint. The finish is a visual selection for exposed black truss; it does not change the connection requirements, load limitations, or engineering requirements of the completed structure.

Fixed 10 mm Collar
Adds 10 mm / 0.39 in at one verified compatible joint.
Male-to-Male Conical Form
Provides double-ended male conical interfaces for compatible truss receivers.
Matte Black Powder Coat
Provides a black-finish component for truss that remains exposed to view.
Connection Component
It is not a truss section, support point, or direct load-attachment location.

Finish Context

Finish Is a Selection Attribute. It Is Not a Structural Difference.

Choose the black variant when a compatible connection requires 10 mm and an exposed brushed aluminum spacer would be visually inconsistent with the surrounding truss. Select the correct spacer length first; select the finish second.

Same Dimensional Function
Adds the same fixed 10 mm / 0.39 in as the brushed aluminum EVT290A-CS10.
Visual Continuity
Provides a finish-matched option for exposed black truss structures.
No Engineering Change
Finish selection does not alter connection requirements, load limits, or engineering requirements.

What the Spacer Supports

Match the Finish Where the Truss Stays Exposed to View.

The EVT290A-CS10 Black is used at the same verified connection points as the standard CS10 spacer, where the completed truss remains exposed to view. Confirm the 10 mm requirement, receiver interface, selected coupler, pins, r-clips, engagement, support arrangement, and engineering requirements before modifying any connection.

Theater and Stage Rigs
For planned exposed black truss in theatrical and live-production environments.
Studios
For black technical frames around planned lighting, camera, sensor, and set structures.
Houses of Worship
For black truss used in planned lighting, audio, video, and display structures.
Exhibits and Retail
For exposed black truss assemblies in branded exhibit and retail environments.

Selection Guidance

Use It When the Truss Needs 10 mm and the Joint Needs Black.

Select this model only when the verified connection requires 10 mm / 0.39 in, a matte black finish is required, and the complete compatible connection has been confirmed. Do not use a finish-matched spacer as a substitute for the correct dimensional spacer length or to force an unapproved connection.

Required Length
The selected compatible connection requires exactly 10 mm / 0.39 in.
Required Finish
The installed exposed truss system requires a matte black component at the joint.
Confirmed Connection
The coupler, receivers, pins, r-clips, and complete connection engagement have been verified.
Not a Workaround
Do not use to force misaligned, damaged, or unapproved truss connections.

Included Components

One Matte Black Spacer. Retaining Hardware Sold Separately.

The EVT290A-CS10 Black ships as one double-ended male conical spacer with a matte black powder-coat finish. It does not include coupler-pins, r-clips, or other retaining hardware. Select and verify all required hardware for the completed approved connection before installation.

1 Male-to-Male Spacer
One double-ended male conical spacer inserts between compatible truss receivers.
10 mm Length Added
Adds 10 mm / 0.39 in at the selected compatible connection point.
Matte Black Finish
Aluminum Alloy EN AW-6061 T6 spacer with a matte black powder-coat finish.
No Retaining Hardware
Coupler-pins and r-clips are not included and must be selected for the complete verified connection.
Do not stack spacers without specific approval.

Use the selected spacer only for the approved measurement adjustment. Do not stack multiple spacers at one connection point without project-specific engineering approval for the completed connection.

Technical Reference

EVT290A-CS10 Black Specifications.

The following values identify the spacer dimensions, material, finish, weight, included-component scope, and listed system fit. Confirm current manufacturer drawings, instructions, required retaining hardware, component condition, and project requirements before ordering, assembling, lifting, or loading a modified truss structure.

Identification

Product Information

Model / SKUEVT290A-CS10-Black
Product TypeDouble-Ended Male Conical Coupler Spacer
Component Weight0.40 lb / 0.18 kg

Dimensions

Size

Spacer Length10 mm / 0.39 in
Outer Diameter50 mm / 1.96 in
Overall Height90 mm

Construction

Material and Finish

MaterialEN AW-6061 T6 Aluminum
FinishMatte Black Powder Coat
Included HardwareNone, Pins and R-Clips Not Included

System Fit

Compatibility

Primary SystemsEVT290I, EVT290T, EVT290S
Listed CompatibilityF34 and EVT50ST, When Interfaces Match

System Compatibility

Use CS10 Black in Compatible 290 mm Conical Truss Connections.

The EVT290A-CS10 Black is a double-ended male conical spacer for compatible 290 mm conical truss connection points. Compatibility requires matching receiver spacing, conical coupler dimensions, chord interfaces, coupler-pin length, r-clip fit, complete engagement, and engineering data for the modified structure.

EVT290S Compatibility
Use with compatible EVT290S sections, corners, bases, and accessories when the complete connection is verified.
F34 Compatibility
Use with F34-format components only when receivers, couplers, pins, and retention hardware match.
Connection Engagement
Verify the selected coupler fully engages both receivers and required retaining hardware remains suitable for the completed joint.
Mixed-System Verification
Confirm the entire completed connection through a physical ground test-fit before lifting the structure.
Mechanical fit does not establish structural suitability.

A spacer can physically fit within a connection without the completed modified structure having approved support or load conditions. Verify component interfaces, manufacturer documentation, hardware, and project-specific engineering before use.

Installation Overview

Confirm the Complete Joint Before It Is Loaded or Lifted.

Install the CS10 Black only in a verified compatible truss connection using serviceable components, correct coupler-pins and r-clips, current manufacturer instructions, and the approved project plan. Do not force a spacer or connection into alignment.

01 — Confirm the Requirement
Confirm the approved connection requires a 10 mm addition and a black-finish component at the selected joint.
02 — Inspect Components
Inspect the spacer, receivers, couplers, pins, r-clips, and adjoining truss for damage, wear, or deformation.
03 — Test-Fit the Joint
Confirm required engagement between the spacer, receivers, coupler, pins, and retaining hardware before installation.
04 — Secure Hardware
Install all required coupler-pins and r-clips fully and correctly before handling, lifting, or loading the structure.

Safety and Engineering

The Black Finish Does Not Change the Structural Boundaries.

The EVT290A-CS10 Black does not independently establish a load rating for the modified structure. The spacer changes one connection geometry, so evaluate the completed layout for support conditions, joint engagement, installed loads, handling method, and engineering requirements. Do not support loads directly from the spacer connection unless the exact approved load case specifically permits it.

Do not exceed the capacity of the spacer, installed connection hardware, or completed truss system.
Do not support loads directly from the spacer connection unless the exact approved load case permits it.
Verify complete coupler engagement in both receivers after the spacer is installed.
Use coupler-pins and r-clips selected for the complete verified connection.
Do not stack spacers at one connection point without project-specific engineering approval.
Use qualified rigging or engineering review for overhead, public-facing, outdoor, load-bearing, or regulated modified structures.

Product Questions

EVT290A-CS10 Black Questions.

What is different about the black version?

It has the same fixed 10 mm / 0.39 in dimensional function as the brushed aluminum CS10 spacer. The matte black powder coat is a finish selection for exposed black truss.

Are coupler-pins included?

No. The product includes the spacer only. Coupler-pins and r-clips must be selected separately for the complete verified connection.

Can loads be supported from this joint?

Do not support loads directly from the spacer connection unless the exact approved load case specifically permits it.

Should the black version be selected for finish alone?

No. Select it only when the connection requires exactly 10 mm / 0.39 in. The black finish is secondary to the correct dimensional spacer length.

Need a Black-Finish 10 mm Spacer for 290 mm Truss?

Contact us for black-truss compatibility checks, retaining-hardware guidance, measurement review, quantities, CAD resources, and engineering coordination.

Contact UsRequest a Quote

Structural Solutions, Unmatched Innovation

Weight 0.4 lbs
Dimensions 3.54 × 2 × 2 in