EVT12S-TTM

EVT12S System Knowledge Center

Truss Top Mount Bar for 12 x 12 Box Truss.
A Length-Selectable Mounting Bar for EVT12S Truss Systems.

The EVT12S-TTM is a brushed aluminum mounting-bar family available in 24, 36, 48, and 60 inch lengths. Each bar stands 12 in tall and is ordered with either a conical or a 12-inch standard bolt-plate connection. Review the complete truss, attachment method, equipment, and applied loads before use.

Product Facts

Product Family / SKUEVT12S-TTM

Product TypeLength-Selectable Truss Top Mount Bar

Available Lengths24, 36, 48, and 60 in

Overall Height12 in / 304.8 mm

MaterialEN AW-6061-T6 Aluminum

FinishBrushed Aluminum

24–60 inAvailable Lengths

12 inOverall Height

50 mmMain Tubing

2 TypesConnection Options

4 LengthsProduct Variants

Product Overview

A Length-Selectable Mounting Bar for 12 x 12 Truss Systems.

This mounting-bar family adds a length-selectable mounting point to EVT12S truss systems. It is built from EN AW-6061-T6 aluminum with 50 mm main tubing and a 5 mm wall. Review the complete truss, attachments, connection hardware, and applied loads before use.

Four Length Options

Available in 24, 36, 48, and 60 inch versions.

Brushed Aluminum Finish

A brushed aluminum surface finish.

50 mm Main Tubing

1.96 in / 50 mm outside diameter.

Connection Selection

Specify a conical or 12-inch standard bolt-plate connection when ordering.

Application Uses

For Truss Systems Using A Length-Selectable Mounting Bar.

This top mount bar may be specified within completed truss systems for equipment-mounting arrangements. Confirm the complete system’s configuration, supports, connections, attachment method, equipment, environmental conditions, and applied loads before use.

Motion Capture Arrays

For project-specific mounting arrangements used with motion capture equipment.

Lighting Fixture Mounting

For completed truss systems with specified lighting fixture attachments.

Studio Equipment Positions

For studio systems using a mounting-bar configuration.

Special Effects Equipment

For specified attachment arrangements within the completed system.

Technical Demonstration Systems

For controlled technical, training, or demonstration environments.

Available Variants

Choose the Length That Matches Your System Design.

The EVT12S-TTM family comes in four lengths. Confirm the variant SKU, connection type, equipment, attachment method, and complete-system requirements before ordering or use.

24 Inch — EVT12S-TTM24

2 ft / 609.6 mm. Offered with a conical or 12-inch standard bolt-plate connection.

36 Inch — EVT12S-TTM36

3 ft / 914.4 mm. Offered with a conical or 12-inch standard bolt-plate connection.

48 Inch — EVT12S-TTM48

4 ft / 1219.2 mm. Offered with a conical or 12-inch standard bolt-plate connection.

60 Inch — EVT12S-TTM60

5 ft / 1524 mm. Offered with a conical or 12-inch standard bolt-plate connection.

Connection Selection

Specify the Connection Type When Ordering.

Choose either a conical or a 12-inch standard bolt-plate connection when you order. A separate hardware list is not provided for this product family, so confirm what your connection needs before ordering.

Conical Connection

Select this option when your truss connection calls for a conical interface.

12-Inch Standard Bolt Plate

Select this option when your truss connection calls for a 12-inch standard bolt-plate interface.

Connection Verification

Confirm the connection type before ordering.

System Documentation

Review current product drawings and manufacturer instructions before use.

Technical Reference

EVT12S-TTM Top Mount Bar Specifications.

Identification

Product Family Details

Product Family / SKUEVT12S-TTM

BrandEvolve Truss

Product TypeLength-Selectable Truss Top Mount Bar

VariantsEVT12S-TTM24, EVT12S-TTM36, EVT12S-TTM48, EVT12S-TTM60

Warranty1-Year Limited Manufacturing-Defect Warranty

Dimensions

Shared Dimensions

Overall Height12 in / 304.8 mm

Available Lengths24, 36, 48, and 60 in

Material and Tubing

Construction

MaterialAluminum Alloy EN AW-6061-T6

Main Tubing1.96 in / 50 mm OD

Wall Thickness0.20 in / 5 mm

Profile Width1.96 in / 50 mm

FinishBrushed Aluminum

Connection Context

System Interface

Connection SelectionConical or 12-Inch Standard Bolt Plate

RequirementSpecify connection type when ordering

CompatibilityVerify the truss connection interface before ordering

Fit NoticeExact fit with other systems is not guaranteed

System Compatibility

Select the Required Connection Type. Verify the Complete Interface.

The bar is offered with a conical or a 12-inch standard bolt-plate connection. General fit with other systems is not guaranteed. Verify the applicable connection interface, hardware, attachment method, and completed-system suitability before ordering or use.

Connection Type

Specify conical or 12-inch standard bolt-plate connection type at order.

Truss Interface

Compare the connection interface before ordering.

Attachment Method

Confirm the mounting-bar attachment method for the completed system.

Completed System

Review the truss, equipment, hardware, supports, and applied loads together.

Assembly Overview

Confirm the Connection Selection. Inspect the Complete Mounting Arrangement.

Assembly should be performed by personnel qualified for the truss and attachment system in accordance with applicable manufacturer requirements. This outline provides neither capacity values nor installation approval.

01 — Confirm Variant

Confirm the selected length SKU and required connection type.

02 — Inspect

Check the bar, mounting points, truss connection, hardware, and attachments for damage.

03 — Connect

Use the applicable connection interface and required hardware.

04 — Attach Equipment

Install equipment only as specified for the complete mounting arrangement.

05 — Check Seating

Confirm all required connections and hardware are fully seated.

06 — Review Before Service

Review the completed truss, equipment, supports, and attachments before use.

Safety and Engineering

A Mounting Bar Holds Equipment in Place. It Does Not Establish System Capacity.

Allowable loading depends on the complete truss and attachment system, including the selected bar length, connection type, equipment, attachment method, supports, orientation, and applied loads. No stand-alone capacity value or torque value is provided here.

Inspect the top mount bar, truss connection, hardware, mounting points, attachments, and connected truss before every use.

Remove any component with cracks, bends, deformation, damaged welds, damaged attachment points, or substantial finish damage from service.

Use only the correct connection type and the applicable manufacturer assembly procedure.

Do not treat this mounting bar as a stand-alone rated support point.

Confirm the complete truss, equipment, attachment method, supports, connection hardware, and applied loads before use.

Suspended, load-bearing, dynamic-load, and complex applications require qualified structural or entertainment-rigging review.

Have a competent person perform a documented inspection at least annually and remove unsafe parts from service.

EVT12S-TTM Frequently Asked Questions.

What lengths does the top mount bar come in?

It comes in four lengths: 24 in (EVT12S-TTM24), 36 in (EVT12S-TTM36), 48 in (EVT12S-TTM48), and 60 in (EVT12S-TTM60), which equal 2, 3, 4, and 5 ft. Every length is 12 in tall.

Which connection type should I choose?

Choose conical or 12-inch standard bolt-plate to match the connection interface of the truss the bar will mount on. Confirm the interface before ordering.

Does it include connection hardware?

A separate hardware list is not provided for this product family. Confirm what your connection type needs when you order.

Does the bar have its own capacity rating?

No stand-alone capacity value is provided, and the bar should not be treated as a rated support point. Capacity depends on the complete truss and attachment system, so have the equipment, attachment method and applied loads reviewed together.

Need an EVT12S Top Mount Bar?

Structural Solutions, Unmatched Innovation

Weight	12 lbs
Dimensions	38 × 2 × 2 in
LENGTH	24-Inch, 36-Inch, 48-Inch, 60-Inch