EVT290A-BCON
$16.95 Original price was: $16.95.$11.00Current price is: $11.00.
EVT290A-BCON | Half Conical Connector with M10 Thread for Truss Base Plates
Dimensions & Specs
Thread Specification: M10 x 1.5 Pitch
Bolt Length: 20mm
Compatibility: Standard 290mm Truss Conical Connection points
Construction
Material Type: Aluminum Alloy 6061-T6
Function: Used to attach truss segments to aluminum or steel base plates
Finish & Features
Included: Conical Half Connector, Steel Coupler Pin, Cotter Pin (R-Clip), and M10 x 20mm Bolt
Weight: 0.28 lb (0.13 kg)
In stock
EVT290S Truss Systems Knowledge Center
EVT290A-BCON Half Conical Connector.
For Attaching Compatible 290 mm Truss to a Base Plate.
The EVT290A-BCON is a half conical connector used to attach compatible 290 mm truss to a base plate. It mounts to aluminum, steel, or project-specific base-plate material with an M10 x 20 mm bolt and connects to truss through a standard coupler-pin and r-clip. Use it in documented ground-supported truss pillars, totems, arches, portals, and display structures where the complete base-plate and truss assembly has been selected for the intended application.
Product Facts
Product Overview
Attach Compatible 290 mm Truss to an Approved Base Plate.
The EVT290A-BCON makes two separate connections. Its flat mounting face fastens to the base plate with the included M10 x 20 mm bolt. Its truss side uses a standard half conical coupling: a coupler-pin secures the truss connection and an r-clip retains the installed pin. The M10 mounting bolt attaches the connector to the base plate; it is not part of the truss-side conical connection.
What the Connector Can Build
Ground-Supported Truss Structures that Begin at a Base Plate.
The BCON is used wherever a compatible truss structure begins from a base plate instead of another truss segment. Base-plate material, thickness, ballast, mounting conditions, installed loads, and the complete support arrangement must be selected for the actual finished structure.
Included Components
One Half Conical Connector with Hardware for One Base Plate Connection.
The EVT290A-BCON package includes one half coupler, one coupler-pin, one r-clip, and one M10 x 20 mm mounting bolt. The coupler-pin and r-clip secure the compatible truss-side connection. The M10 bolt secures the connector to the base plate. Confirm current package contents and inspect all components before assembly.
Verify the mounting-bolt torque, the installed coupler-pin, and the installed r-clip before the finished structure is moved, loaded, or opened for use.
Technical Reference
EVT290A-BCON Specifications.
The following values identify the BCON connector, base-plate mounting bolt, material, included hardware, and listed system fit. Confirm current manufacturer drawings, instructions, component condition, package contents, load documentation, and project requirements before ordering, assembling, or loading the finished structure.
Identification
Product Information
Construction
Material and Finish
Base Plate Mounting
Bolt and Thread
Connection System
Hardware and Compatibility
System Compatibility
Use the BCON in Compatible 290 mm Conical Truss Structures.
The BCON uses a 290 mm conical truss interface and is intended for compatible EVT290I, EVT290T, EVT290S, F34-format, and matching 290 mm conical systems where receiver details, coupler dimensions, coupler-pin alignment, r-clip fit, component condition, and applicable documentation are verified. The finished base-plate structure requires review for the actual layout, support conditions, ballast, and attached loads.
Verify the actual component interface, required hardware, base-plate mounting conditions, manufacturer documentation, and project-specific engineering before mixing brands or building a revised structure.
Assembly Overview
Mount the Connector First, Then Make the Standard Truss Connection.
The base-plate mounting bolt and the truss-side conical coupling are separate steps. Assemble the finished structure on an appropriate surface with trained personnel, compatible components, current manufacturer instructions, and the approved project plan. Never force the truss-side connection into alignment.
Safety and Engineering
A Base Plate Connector Requires A Complete Support Plan.
The BCON does not establish an allowable load, structure height, ballast requirement, or freestanding-structure rating by itself. The base-plate mounting bolt and truss-side conical connection must both be verified. Evaluate the selected base plate, its material and thickness, ballast or anchoring, truss geometry, connections, installed loads, lateral forces, public access, and environmental conditions as part of the completed structure. Obtain qualified rigging and engineering review for public-facing, outdoor, load-bearing, or otherwise regulated installations.
Product Questions
EVT290A-BCON Questions.
Does the truss bolt on, or connect through the standard coupler?
The truss connects through the standard half conical coupler, secured with a coupler-pin and r-clip. The M10 x 20 mm bolt mounts the BCON to the base plate only.
What hardware is included with one BCON?
Each unit includes one half coupler, one coupler-pin, one r-clip, and one M10 x 20 mm mounting bolt with a 1.5 thread pitch.
What torque and tool are required?
Torque the M10 mounting bolt to 11 ft-lb using a 6 mm hex key.
Can the connector be used with other 290 mm truss brands?
Use it only after the full conical connection interface and completed structure have been verified. Nominal 290 mm size or physical fit alone does not establish compatibility or structural suitability.
Planning a Base-Plate Truss Pillar, Totem, or Arch?
Contact us for BCON selection, compatible base plates, matching EVT290I / EVT290T / EVT290S / F34 components, connection hardware, custom-structure planning, engineering coordination, and freight assistance.
Structural Solutions, Unmatched Innovation
| Weight | 0.28 lbs |
|---|---|
| Dimensions | 2 × 2 × 2 in |