EVT290A-CS60

EVT290A-CS60

Original price was: $47.00.Current price is: $31.00.

EVT290A-CS60 | 60mm Coupler Spacer for 290mm Truss

Dimensions & Specs
Spacer Length: 2.36 in (60 mm)
Outer Diameter: 1.96 in (50 mm) (Matches standard truss tubing)
Function: Expands truss length for custom measurements and adjustments

Construction
Material Type: Aluminum Alloy EN AW-6061 T6
Type: Double-Ended Male Conical Coupler
Compatibility: Fits standard 290mm Truss Conical Connection points

Finish & Features
Surface: Aluminum Brush Finish
Included: 60mm Spacer Coupler Only
Note: Coupler Pins and Cotter Pins are NOT included
Weight: 0.99 lb (0.45 kg)

In stock

SKU: EVT290A-CS60 Categories: , , ,

EVT290S Truss Systems Knowledge Center

EVT290A-CS60 60 mm Male Truss Coupler Spacer.
Adds 60 mm at One Compatible 290 mm Conical Truss Connection.

The EVT290A-CS60 is a double-ended male conical aluminum spacer that adds a fixed 60 mm / 2.36 in at one compatible 290 mm truss connection. Before installation, confirm the connection requires 60 mm and that the complete joint—including receivers, conical coupler, coupler-pin length, r-clip fit, and retaining hardware—remains suitable with the spacer installed. It is not a truss section, independent support point, or direct load-attachment location.

Product Facts

Model / SKUEVT290A-CS60
Product TypeDouble-Ended Male Conical Coupler Spacer
Added Length60 mm / 2.36 in
Outer Diameter50 mm / 1.96 in
MaterialAluminum Alloy EN AW-6061 T6
Component Weight0.99 lb / 0.45 kg
60 mmLength Added
50 mmOuter Diameter
140 mmOverall Height
0.99 lbComponent Weight
Not IncludedPins and R-Clips

What It Is

A Fixed 60 mm Coupler Spacer for One Specific Connection Condition.

The CS60 is a single-piece, double-ended male conical spacer with an integrated 60 mm collar. It is manufactured from Aluminum Alloy EN AW-6061 T6 with a brushed finish. Its fixed geometry must match the approved requirement at the selected compatible connection.

Fixed 60 mm Collar
Adds 60 mm / 2.36 in; it does not provide adjustable travel.
Male-to-Male Form
Provides double-ended male conical interfaces for compatible truss receivers.
Brushed Aluminum
EN AW-6061 T6 aluminum with brushed finish.
Connection Component
It is not a truss section, support point, or direct load-attachment location.

What It Changes

It Adds 60 mm to One Joint. It Does Not Create a New Load Point.

The CS60 adds 60 mm / 2.36 in at one selected compatible connection. It does not independently establish a load rating, allowable span, pick-point location, or support arrangement.

What the Spacer Supports

Close a Larger Measured Difference at a Single Connection.

Use the CS60 only where a verified compatible truss connection requires 60 mm. Confirm the receiver interface, selected coupler, required pins and r-clips, complete layout, support conditions, and engineering requirements before modifying a connection.

Custom Measurement Adjustments
Address a verified 60 mm measurement difference without modifying a truss section.
Architectural Alignment
Match reviewed exhibit and architectural interfaces with measured conditions.
Technical Frame Adjustments
Adjust controlled dimensions around planned technical interfaces.
EVT290S and F34
Use with verified compatible 290 mm conical systems and matching hardware.

Included Components

One Spacer. Retaining Hardware Sold Separately.

The CS60 ships as one double-ended male conical spacer. Coupler-pins, r-clips, and other retaining hardware are not included. Select and verify all required hardware for the completed approved connection before installation.

1 Male-to-Male Spacer
Inserts between compatible truss receivers.
60 mm Length Added
Adds 60 mm / 2.36 in at the selected connection.
6061-T6 Aluminum
Brushed aluminum finish.
No Retaining Hardware
Pins and r-clips must be selected for the verified connection.
Do not stack spacers without specific approval.

Do not stack multiple spacers at one connection point without project-specific engineering approval for the completed connection.

Technical Reference

EVT290A-CS60 Specifications.

Identification

Product Information

Model / SKUEVT290A-CS60
BrandEvolve Truss
Weight0.99 lb / 0.45 kg

Dimensions

Size

Spacer Length60 mm / 2.36 in
Outer Diameter50 mm / 1.96 in
Documented Dimensions50 x 140 x 50 mm

Construction

Material and Finish

MaterialEN AW-6061 T6 Aluminum
FinishBrushed Aluminum
Included HardwareNone, Pins and R-Clips Not Included

System Compatibility

Use CS60 in Compatible 290 mm Conical Truss Connections.

Compatibility requires matching receiver spacing, coupler dimensions, chord interfaces, pin length, r-clip fit, complete engagement, and engineering data for the modified structure.

Mechanical fit does not establish structural suitability.

Verify all interfaces, documentation, hardware, and project-specific engineering before use.

Installation Overview

Confirm the 60 mm Requirement. Then Confirm the Entire Connection.

01 — Confirm Requirement
Confirm the approved system requires a fixed 60 mm addition.
02 — Inspect Components
Inspect spacer, receivers, couplers, pins, r-clips, and adjoining truss.
03 — Test-Fit
Confirm all components achieve required engagement.
04 — Secure and Inspect
Install all required hardware fully before handling, lifting, or loading.

Safety and Engineering

The Spacer Changes One Connection. It Does Not Override System Limits.

The CS60 does not independently establish a load rating. Evaluate the completed layout for support, joint engagement, loads, handling method, and engineering requirements. Do not support loads directly from the spacer connection unless the exact approved load case specifically permits it.

Do not exceed the capacity of the spacer, connection hardware, or completed truss system.
Verify complete coupler engagement in both receivers.
Use pins and r-clips selected for the completed verified 60 mm connection.
Use qualified rigging or engineering review for regulated or load-bearing structures.

Product Questions

EVT290A-CS60 Questions.

What does the CS60 do?

It adds a fixed 60 mm / 2.36 in at one compatible 290 mm conical truss connection.

Are pins included?

No. Coupler-pins and r-clips must be selected separately for the completed verified connection.

Can it be a load point?

No. Do not support loads directly from the spacer connection unless an exact approved load case permits it.

Need to Close a 60 mm Truss Measurement Difference?

Contact us for compatibility checks, hardware guidance, measurement review, quantities, and engineering coordination.

Contact UsRequest a Quote

Structural Solutions, Unmatched Innovation

Weight 0.99 lbs
Dimensions 2 × 2 × 2 in